Wood Machine Laser MT-1580 work with 2 sets of co2 laser tube, power supply, cooling system and laser cutting heads, so that the processing efficiency will be doubled. Dual heads laser cutting equipment is to put the moving control into full play and therefore increase the working effects of laser processing. In each aspect, from the software design, mechanical structure to the configuration, the tenet is to serve for the processing to make sure the stability, precision and speed under the safe and overall quality-management working environment. There are two working places for this laser cutting machine/engraving machine, which can alternate automatically so that the machine can cut while feeding and the feeding time is greatly decreased.
1. Specification:
|
Model
|
MT-1580
|
|
Work Area (cm)
|
1500 X 800mm
|
|
Laser Generator
|
Water cooled Co2 glass sealed laser tube
|
|
Laser Power
|
70W-150W(Optional)
|
|
Drive Motors
|
Micro stepping stepper motor system
|
|
Control System
|
64 Bit DSP
|
|
PC Interface
|
USB 2.0 Port, USB Disk
|
|
Cutting Speed
|
0-48000mm/min
|
|
Resolution Ratio
|
<0.025mm
|
|
Power Supply
|
AC110V/220V-240V ± 10%, 50/60HZ
|
|
Location Precision
|
<0.01mm
|
|
Operating Temperature
|
0℃-45℃
|
|
Graphic Format supported
|
HPGL(PLT), JPGE, PCS, TGA, DST, DXP, DXF, DWG, CDR
|
|
Red Pointer
|
Optional
|
|
Dual Laser Head
|
Yes
|
|
Accessories
|
Water cooling unit, Air Pump, Exhaust Blower Unit
|
|
Warranty
|
12 Months
|
|
Dimension (cm)
|
248×160×120
|
|
Weight (kg)
|
560
|
2. Feature:
1) Double heads laser cutting machines with two working places can alternate vertically and enable the cutting while feeding
2) 100% production increase, 10% material consumption decrease and no abrasion on the baseboard
3) Continuous circle cutting and the maxi circle cutting speed: 30m/min
4) Laser power and speed can be matched automatically to ensure the best effects
5) USB2.0 high-speed port
6) Insulation system and high speed difference input and output electro circuit design can avoid the aberrance in distant signal transportation and realize the 12 working status output and 16 status input, which can easily connect with the working processing.
7) 128 files can be save for the off-line computer work, which is proper for large quantity and repeat processing
3. Applicable Materials:
Wood, paper, leather, cloth, organic glass, resin, acrylic, woolens, plastic,wollens,plastic,rubber,ceromlctile,crystal,bowlder,bomboo and other noon-metal material.
4. Applicable Industry:
This model Laser Cutting Equipment apply to cloth, leather, fabric toy, computerized Embroidery cutting, electric product.
